3D Systems share price today

3D Systems Corporation's share price was $2.64 at the close on 4 November 2026. That is 5.4% below its average price over the last 200 trading days. In the last 52 weeks it traded between $2 and $4, and at that close it sat 42% of the way up from that low.

A share price tends to move through four phases: moving sideways (stage 1), rising (stage 2), stalling near a high (stage 3) and falling (stage 4). The phase helps read everything below.

Over the past 13 weeks it has done worse than the S&P 500, and it has been behind for 1 week running.

Over the last 1 year the share price moved +54% while the S&P 500 moved +23%, so it is ahead of the index over that whole period. It was last ahead over 13 weeks in the week of 30 October 2026. The chart above shows the 13-week comparison for every week.

This page treats a rise as over when the price closes below its 200-day average on two Fridays in a row.

3D Systems Corporation pays no dividend. In the last 12 reported quarters it declared no dividend per share, so there is no payout history to chart and no yield to show. Companies like this usually keep their earnings in the business, so the cash-flow sections show where that cash goes.

3D Systems is on one of our US lists: US tech stocks.

3D Systems Corporation posted a net loss of $12.9 M in the Jun 2026 quarter. Full-year FY25 profit was $29.9 M. Over 4 years profit has grown −44.8% a year on average. That loss is 13.6% of the quarter's revenue. The same quarter a year earlier earned $104 M. 11 of the last 12 reported quarters were loss-making.

Net profit is what is left after every cost, interest and tax. Earnings per share, dividends and book value all grow from it.

Jun 2026 profit was −$12.9 M, −112.3% on a year earlier.

3D Systems Corporation reported $94.6 M of revenue in the Jun 2026 quarter, −0.3% on the same quarter a year earlier. Over 4 years it has grown −11.0% a year on average. The last full year, FY25, came in at $387 M. The last four reported quarters add to $388 M.

Revenue is everything the company billed its customers in the period.

FY25 revenue was $387 M, −12.1% on the year before.

Recent pace: the last four quarters grew −5.7% on average, against −11.0% a year over the longer run, so this year is growing faster than its own long-run rate.

Is growth speeding up? Revenue over the last 12 months grew −6.2%, against −7.7% a year over the last 8 quarters (stabilising).

3D Systems Corporation's operating margin was −11.3% in the Jun 2026 quarter, 0.5 percentage points lower than the same quarter a year ago. Across 5 years it has been between −30.1% and −5.1%. The latest quarter is within that range.

Operating margin is what is left from every $100 of sales after the costs of running the business, before interest and tax. It shows pricing power and cost control.

Why the margin moved: operating margin changed −0.5 percentage points on the year while gross margin changed −2.6 points. So the drop came mostly from the gross margin, which means input costs and prices charged.

Over the last 2 years 3D Systems Corporation's operations used more cash than they brought in, so cash conversion was −11%, a gap worth watching. In FY25 its operations used $87.8 M of cash, against $29.9 M of profit. After $9.9 M of spending on assets, free cash was −$97.8 M: it spent more than its operations brought in.

The profit and loss account shows what was earned. The cash-flow statement shows the cash that actually came in. Comparing operating cash flow with profit is one of the best checks that a profit is real.

Cash-flow figures here are yearly, because quarterly cash statements are not published, so this section changes once a year.

Why: the cash figure is clear, but the day counts behind it are not in our data, so we show it without guessing the reason.

What to look at next: the main use of cash is spending on assets. The next section checks what that spending is building.

3D Systems Corporation does not report the customer, stock and supplier day counts a cash cycle needs, so this section looks at its spending on assets instead. It spent $53.2 M on assets over the last 3 years. Averaged over those years that is 4.6% of FY25 revenue a year.

Working capital is the cash tied up between paying suppliers and getting paid. Debtor days: how long customers take to pay. Inventory days: how long stock sits. The cash cycle: the whole loop, in days of sales.

Nothing is estimated in place of the missing day counts, so no cash-cycle chart is drawn.

Spending on assets: $53.2 M over the last 3 years.

In short: the cash is going into new capacity, not getting stuck in the daily cycle. The question is whether the new capacity earns.

3D Systems Corporation's P/E is 7.2×, with too little history to compare. This compares the share price with the company’s own past. It does not say what the business is worth.

P/E is the share price divided by a year's profit per share: how many dollars the market pays for each dollar of yearly profit.

In short: there is too little history to say whether the multiple is high or low for this company, so the earnings trend underneath matters more than the multiple.

3D Systems Corporation's business trend cannot be read yet. There are fewer than eight usable quarters of growth figures, so there is not enough history to read the trend. This is based on 12 quarters of 2 measures, with some gaps.

Every business is somewhere on a path of getting better or worse, and this section names where. The last 12 quarters of growth in revenue, profit and earnings per share, plus the return the business earns on its capital, are read as lines. Getting worse: the lines are falling. Turning around: a low point has just formed and the last few quarters are rising from it. Getting better: the rise from the low has lasted. Growing steadily: steady growth with healthy returns. Slowing from a peak: still high, but slowing. When the lines disagree the result is mixed; too little history means no reading. CAGR (compound annual growth rate) is the steady yearly rate that would turn the starting value into the latest one. It is the fairest way to compare growth over different periods. If the 1-year figure is much bigger than the 10-year one, recent growth is running faster than the long-run trend. A dash means there is no figure for that period, or the starting year was a loss, where a growth rate means nothing.

Why it matters: with too little history, we say so rather than guess a direction.

One or more growth lines have an extreme jump caused by comparing with a near-zero or loss-making quarter. Those jumps are capped before reading and drawn at the edge of the chart, so one odd quarter does not decide the result.

The return figures here are yearly, not quarterly. They show level and direction only; they can support the growth lines but never decide the reading alone.

There are fewer than eight usable quarters, so this page does not guess a direction from so little history.

Compound annual growth rate (%)

Compound annual growth rate over each period, %. Revenue, profit and EPS come from yearly figures; the stock price row is price growth over the same periods. A dash means no figure for that period, or the starting year was a loss.

3D Systems Corporation earned a ROE of 12% in FY25. That is up from a low of −144% in FY24. Its return on capital used (ROIC) is 34.5 percentage points below its cost of capital, so growth here does not yet pay for the capital it uses.

Return on equity (ROE) is the profit the business earns on its shareholders’ money. We do not have the full capital split, so ROE is the longest history we can draw here.

It comes from a 7.7% net margin and 0.74× asset turnover (sales divided by assets).

Why the return is what it is (FY25): a 7.7% net margin × 0.74× asset turnover × 2.15× leverage (assets divided by equity) ≈ 12.3% on equity. The margin does its share; borrowing is a big part of it.

The key test, return on capital used minus the cost of capital: −18.6% − 15.9% = −34.5 percentage points. The 15.9% is an estimate of this company's own cost of capital. Read the sign and size of the gap, not the decimals. Negative: growth at these returns loses value until returns improve.

3D Systems Corporation has total debt of $152 M against shareholder equity of $274 M as of Jun 2026, so its debt is 0.56× its equity. Year by year, that ratio went from 0.60 in FY21 to 0.65 in FY25. Keep that borrowing in mind when reading the returns on this page.

Debt-to-equity shows how much of the business is paid for with borrowed money. Lower is safer, and the direction matters as much as the level.

27.2% of 3D Systems Corporation's tradable shares are in short positions, which are bets that the price will fall, so a large group of traders is betting against it. At normal trading volumes, closing those positions would take about 16.5 days. US companies do not publish a quarter-by-quarter list of owners, so this page uses short interest instead.

There is no quarter-by-quarter list of owners here, so we look at short interest: the share of tradable shares held in short positions, which gain if the price falls.

It is a single reading at one point in time; we do not have its history.

Why it is at this level: the figure does not say who has the short positions or why, so we show the level without guessing the story.

For 3D Systems Corporation, the Z-score is −1.83. A Z-score above about 3 is safe and below about 1.8 signals danger, so this is in the danger zone. It estimates how far the balance sheet is from trouble; it is not a forecast of failure.

The Z-score estimates how far a company is from balance-sheet trouble. Above about 3 is safe; below about 1.8 is the danger zone. It was built for manufacturers, so it is not used for banks and lenders.

Why it matters: a Z-score of −1.83 is inside the danger zone, so the balance sheet is a real risk.

44.1 out of 100, rank 16 of 29 in Computer Hardware, with 51% of the evidence available.

3D Systems Corporation scores 44.1 out of 100 against the 29 companies it is compared with in Computer Hardware, ranking 16. Some evidence is missing, so the score is pulled toward the middle on purpose.

The four parts add up to the total exactly: 15.6 + 8 + 10.4 + 10.1 = 44.1. This is the same number shown on the industry page; it is worked out once for the whole group and read here.

What would change it: The score would fall if profit growth turns negative or margins stop improving while the share price lags its sector.

3D Systems ranks 16 of 29 Computer Hardware companies on the 4-Factor Sector Score, with 44.1 out of 100.

Missing figures are not scored as bad. They lower the confidence and pull the final score toward the middle. Relative strength counts only when the company has a reading for this week; with no reading, that factor is left out and its 20 points are shared across the other three in proportion. PEG is not shown when the ratio cannot mean anything: the company must be making a profit, its price-to-earnings must be positive, and its three-year earnings growth must fall between 5% and 60%. Dividing a price multiple by a loss, or by growth measured off a tiny base, produces a number that looks precise and tells you nothing. Under relative strength, one mark per week shows the last 12 weeks: a mark is filled where the company led S&P 500 by 5% or more over the 13 weeks ending that week, which is the same test used everywhere on this site. Price stage places the company on the same six-step path the industry is placed on (basing, turning, breaking out, leader, fading, asleep), read from how many weeks running it has led S&P 500 and whether that lead is growing or shrinking. It describes where the share price stands, not the direction of earnings, and it is not a recommendation; it is left blank for a company whose weekly history is too short or too stale to read.

The figures in this ranking come from the industry comparison: results through the Dec 2026 quarter, and the P/E at that quarter's end. The sections above use the latest weekly price, so a P/E or return there can differ a little from the one here. The stage words in this ranking (such as losing its lead or breaking out) describe the lead over the index, not the price phase in the price section.

Related companies: Computer Hardware, all 29 compared on one page.

3D Systems is the 19th largest of 26 Computer Hardware companies on Sector Alpha by market value (scores of 4 November 2026). Just above it: Quantum Corporation, Unusual Machines, Inc. and Stratasys. Just below it: Nano Dimension, AstroNova, Inc. and Bgin Blockchain.

Computer Hardware companies close in size

16. Quantum Corporation $661 million
17. Unusual Machines, Inc. $651 million
18. Stratasys Ltd. $597 million
19. 3D Systems Corporation $439 million
20. Nano Dimension Ltd. $278 million
21. AstroNova, Inc. $227 million
22. Bgin Blockchain Limited $204 million

All 26 Computer Hardware companies, largest first

Companies close in size in other industries

2907. Forward Industries, Inc. $454 million · Footwear & Accessories
2908. Braskem S.A. $454 million · Chemicals
2909. 3D Systems Corporation $454 million
2910. Commercial Bancgroup, Inc. $453 million · Banks - Regional
2911. YD Bio Limited $453 million · Biotechnology

Sector Alpha, written by code from the published numbers. Data as of 4 November 2026.

Every chart on this page is drawn by code from the published figures, with no forecasts and no price opinions.

See the plain-text version of this page.