Emkay Tools Ltd · ETL⚠ unverified
51%
54%
54%
57%
20-quarter listed-company comparison
Machine Tools - Others Stocks in India
Machine Tools - Others: 1 companies, compared one question at a time.
01 · the index people search for
Nifty Machine Tools - Others Index — Constituents & Performance
All 1 listed Indian Machine Tools - Others companies are named here, largest first — the same constituent set people search for as the Nifty Machine Tools - Others index. Every figure on this page is equal-weighted across those companies, so one large constituent cannot set the reading. Each number carries its own as-of date.
- Emkay Tools Ltd₹1.1K Cr
02 · sector relative strength, before individual stocks
Is Machine Tools - Others outperforming NIFTY 500?
Machine Tools - Others has underperformed NIFTY 500 by 2% over the last 52 weeks. Over 13 weeks the gap is a lead of 2.9%. 1 of 1 covered company currently beats NIFTY on Mansfield relative strength, so leadership inside the sector is selective. Emkay Tools Ltd is the strongest against the sector itself at 0%.
+2.9%Sector vs NIFTY 500 · 13 weeks
-2.0%Sector vs NIFTY 500 · 52 weeks
1/1Stocks leading NIFTY 500
0/1Stocks leading sector
Sector metric: — as of latest available · unclassified · direction unavailable.
The central tension: current leadership is concentrated, so durability matters more than rank.
Start with scale. Then earnings trajectory. Then business quality. Only after those three agree should price leadership carry much weight.
Bottom line
Machine Tools - Others has underperformed NIFTY 500 by 2% over 52 weeks and 2.9% over 13 weeks. 1 of 1 covered companies beat NIFTY on Mansfield relative strength, while 0 of 1 beat the sector itself. Emkay Tools Ltd ranks first at 63.5/100 with 46.8% evidence confidence. The score prioritizes research; it is not a buy recommendation.
Companies
1
complete canonical membership
Combined market value
₹1.1K Cr
Emkay Tools Ltd
Revenue growing
—
positive TTM year-on-year growth
Beating NIFTY 500
1/1
positive Mansfield relative strength
Comparing 1 of 1
03 · research priority, made explicit
Best Machine Tools - Others Stocks in India (Aug 2026), Ranked by Data
4-Factor Sector Score
An additive sector-relative research score. The four displayed point contributions always equal the total: Growth & earnings (35), Capital efficiency (25), Valuation (20), and Relative strength (20). Missing or stale evidence is absorbed inside the affected factor, never applied as a hidden adjustment.
Growth & earnings · 35%Capital efficiency · 25%Valuation · 20%Relative strength · 20%
Emkay Tools Ltd has the strongest current balance of earnings trajectory, business quality, valuation and price confirmation, with 46.8% evidence confidence.
How this score is built, and what the marks mean
Missing observations are not scored as bad. Their missing weight lowers confidence and pulls the final score toward neutral. PEG is not shown when the ratio cannot mean anything: the company must be making a profit, its price-to-earnings must be positive, and its three-year earnings growth must fall between 5% and 60%. Dividing a price multiple by a loss, or by growth measured off a tiny base, produces a number that looks precise and tells you nothing. Under relative strength, one mark per week shows the last 12 weeks: a mark is filled where the company led NIFTY 500 by 5% or more over the 13 weeks ending that week, which is the same test used everywhere on this site. Price stage places the company on the same six-step curve the sector itself is placed on — basing, turning, breaking out, leader, fading, asleep — read from how many weeks running it has led NIFTY 500 and whether that lead is widening or shrinking. It describes where the PRICE stands, not the earnings trajectory and not a recommendation, and it is left blank for a company whose weekly history is too short or too stale to read.
Top 10 Machine Tools - Others Stocks in India
| Company | Score | Price stage | Growth & earnings/35 | Capital efficiency/25 | Valuation/20 | Relative strength/20 |
|---|---|---|---|---|---|---|
| 1Emkay Tools LtdETL | 63.5/100Thin evidence · provisional47% evidence | TURNING | 19.5/35 Revenue — · PAT — · OPM change 3 pp 26% evidence | 21.5/25 ROCE 70.7% · OPM 57% 95% evidence | 10.0/20 P/E 18.7× · PEG — 0% evidence | 12.5/20 RS sector 0% · RS bench 9% · 1Y -0.5%2 of 12 weeks ahead 70% evidence |
| Exact sum: 19.5 + 21.5 + 10 + 12.5 = 63.5 · Decision use: Fill the missing evidence before acting; the ranking is deliberately pulled toward neutral. | ||||||
04 · what price has already done
Market action
Emkay Tools Ltd has the strongest one-year price move in Machine Tools - Others at -0.5%. It also leads on Mansfield relative strength against NIFTY at +9%. 1 of 1 covered company is above zero on that measure. Every line covers 313 weekly closes through 2026-08-13.
Price and relative strength
Every company, the sector's own index and NIFTY 500 all start level on the left edge of the window, so only the distance between the lines counts — the highest line has risen the most since then, and the chart at the top of this page is drawn the same way. It opens on one year; the buttons beside it stretch that to three or five.
How far ahead of or behind NIFTY 500 each company has been running, measured against its own recent average of that comparison, so the flat line at zero IS NIFTY 500: above it the company is beating the market, below it the market is beating the company. It opens on one year.
The same measure taken against Machine Tools - Others itself instead of the whole market, so the flat line at zero is the sector: above it the company is beating its own peers, which is the sharper test of the two. It opens on one year.
05 · not available
Revenue Scale & Growth Durability
No company in this Machine Tools - Others comparison reports revenue on a comparable basis, so there is nothing to rank here — 0 of 1 company has a usable current reading. The section is shown rather than removed so an unavailable metric is not mistaken for one that was quietly left out. Filings were read through Mar 2026.
Revenue is compared on a common reported-currency basis. Growth is year-on-year, so seasonality does not masquerade as progress.
06 · compare level, then change
Operating Economics & Margin Trend
Emkay Tools Ltd is the only Machine Tools - Others company on this page, with OPM of 57%. The same company also holds the highest Margin change, at +3 percentage points. That is the only usable OPM reading on this page, current through Mar 2026. Its OPM series carries 4 reported observations across the 4-quarter window.
What the numbers say: Emkay Tools Ltd leads both opm at 57% and margin change at +3 percentage points.
LeaderEmkay Tools Ltd · 57%
GapNot enough peers
Persistence2/2 recent comparable periods
Coverage1/1 companies · 4 observations
Investor read: Emkay Tools Ltd sets the level benchmark; use the change leader as an inflection watch only after another comparable report confirms it.
This conclusion weakens if: The next two comparable reports reverse the current margin change signal.
Operating margin compares operating profit with revenue. Improvement is measured in percentage points, not percentage growth.
OPMhighest
Margin changefastest expanders
Operating margin · company comparison
1/1 level · 1/1 change
On every company-comparison chart on this page: solid lines show level, dotted lines show change when “Both” is selected, and a missing report breaks the line rather than being invented.
All-company data · latest reported quarter
In every all-company table on this page, each figure is the company’s latest single reported quarter. The rankings above them use trailing-twelve-month or current-market values, so a company can legitimately show a different number in each.
| Company | OPM | Margin change | Reported |
|---|---|---|---|
| Emkay Tools Ltd ETL⚠ unverified | 57% | +3.0 pp | Mar 2026 |
Full 4-quarter history · every available company
OPM · reported quarter history
Margin change · reported quarter history
Emkay Tools Ltd · ETL⚠ unverified
—
—
+3.0 pp
+3.0 pp
07 · not available
Profit Scale & Acceleration
No company in this Machine Tools - Others comparison reports net profit on a comparable basis, so there is nothing to rank here — 0 of 1 company has a usable current reading. The section is shown rather than removed so an unavailable metric is not mistaken for one that was quietly left out. Filings were read through Mar 2026.
Net profit is the residual after operating costs, interest and tax. Growth off a loss or near-zero base is excluded from the fastest-grower rank.
08 · compare level, then change
Return On Capital Employed
Emkay Tools Ltd is the only Machine Tools - Others company on this page, with ROCE of 70.7%. The same company also holds the highest ROCE change, at -0.2 percentage points. That is the only usable ROCE reading on this page, current through Mar 2026.
What the numbers say: Emkay Tools Ltd leads ROCE at 70.7%. Emkay Tools Ltd has the strongest latest improvement at -0.2 percentage points. Read the leader beside the density of its reported history: a sparse high return is a candidate; a repeated high return is evidence of durability.
LeaderEmkay Tools Ltd · 70.7%
GapNot enough peers
PersistenceNot enough history
Coverage1/1 companies · 2 observations
Investor read: Emkay Tools Ltd sets the level benchmark; use the change leader as an inflection watch only after another comparable report confirms it.
This conclusion weakens if: The next two comparable reports reverse the current roce change signal.
ROCE asks how much operating return the business earns on the capital employed. Direction matters, but a single exceptional year should not be mistaken for durability.
ROCEhighest
ROCE changefastest improvers
Return on capital · company comparison
1/1 level · 1/1 change
All-company data · latest reported quarter
| Company | ROCE | ROCE change | Reported |
|---|---|---|---|
| Emkay Tools Ltd ETL⚠ unverified | 55% | −0.2 pp | Mar 2026 |
Full 4-quarter history · every available company
ROCE · reported quarter history
Emkay Tools Ltd · ETL⚠ unverified
—
—
56%
55%
No consistent historical series is available for roce change.
09 · compare level, then change
Valuation Against Growth & Quality
No company in this Machine Tools - Others comparison reports a valuation figure this section can compare, so the PEG rank is empty. On P/E, Emkay Tools Ltd is lowest at 18.7×, across 1 of 1 company with a usable reading. PEG asks what price is being paid for growth; P/E keeps that answer anchored to the actual earnings multiple.
What the numbers say: There is not enough comparable evidence to name a reliable peg leader.
LeaderNo comparable leader
GapNot enough peers
PersistenceNot enough history
Coverage0/1 companies · 0 observations
Investor read: Treat valuation as permission to investigate, never as a standalone reason to buy.
This conclusion weakens if: The next two comparable reports reverse the current p/e signal.
PEG is shown only when earnings are positive and three-year EPS growth is between 5% and 60%. It is recomputed consistently as the trailing P/E divided by that growth rate — reported earnings, never an expected-earnings multiple. On Indian companies it is shown only where the two data feeds agreed. Where any of that fails the ratio is left out rather than printed: a P/E divided by a loss, or by growth measured off a tiny base, is a number that looks precise and means nothing.
PEGlowest PEG
—Not enough comparable data—
P/Elowest P/E
Valuation · company comparison
0/1 level · 1/1 change
All-company data · latest reported quarter
| Company | PEG | P/E | Reported |
|---|---|---|---|
| Emkay Tools Ltd ETL⚠ unverified | — | 19.2 | Mar 2026 |
Full 4-quarter history · every available company
No consistent historical series is available for peg.
P/E · reported quarter history
Emkay Tools Ltd · ETL⚠ unverified
—
—
21.9
19.2
10 · before the conclusion, check the blind spots
What can make this comparison misleading?
This Machine Tools - Others comparison names 6 specific ways its own evidence can mislead, all listed below. The one company here reports on comparable dates, so no rank carries a stale marker. 1 draws at least one figure from a second feed with too little overlap to cross-check. A high growth rate can still be a low-base artefact.
Keep these limits visible
- A high growth rate can be a low-base artefact. The page keeps level and change separate for that reason.
- A high ROCE can be temporary or flattered by a small capital base. Read it beside margin, cash conversion and reinvestment.
- The 4-Factor Sector Score ranks research priority, not portfolio action. Management quality, catalysts and risks need equally fresh evidence before capital is deployed.
- An “all companies” line chart preserves completeness, but rank changes should be checked against reporting dates before drawing a conclusion.
- 1 company draws at least one figure from a second data feed with too little overlapping history to cross-check against the primary source; it is marked unverified wherever that figure appears.
- Thin comparisons: Revenue, Net profit, Valuation have fewer than three usable current readings.
11 · evidence and freshness
How was this comparison built?
This comparison is built from the reported filings of 1 Machine Tools - Others company, normalized to a common ₹ scale and a shared quarter axis of up to 4 quarters each. Fundamentals run through Mar 2026 and market data through 2026-08-14. A second data feed fills gaps only after identity and scale reconciliation, and missing observations are never interpolated.
FundamentalsThrough Mar 2026 · up to 4 quarters per company
Market dataThrough 2026-08-14 · weekly price and relative-strength history
Derived metricsGrowth, changes and PEG are calculated only when their inputs are comparable.
Score confidenceMissing and stale evidence reduces confidence and pulls the 0–100 research-priority score toward neutral.
Source standing0 cross-checked · 1 unverified · 0 withheld, of 1 graded companies.
How a second data feed is admitted, and what happens when it disagrees
A second feed is read only after its reported income is matched against the primary source on at least three overlapping periods. Where the two agree the figures fill silently. Where there is too little shared history to compare, the figures are still drawn — they are the only evidence there is — and marked ⚠ unverified everywhere they appear. Where the two are known to disagree, nothing from the second feed is drawn and the affected company is named under the chart it is missing from.
12 · questions investors ask, short speakable answers
Machine Tools - Others company comparison FAQs
These 16 answers restate the Machine Tools - Others comparison above in question form. Every one is computed from the same 1 company and the same reported filings as the rankings and charts, current through Mar 2026. Price and relative-strength answers run through 2026-08-14. Nothing here is estimated, and none of it is a recommendation.
Is the Machine Tools - Others sector outperforming NIFTY 500?
Machine Tools - Others has underperformed NIFTY 500 by 2% over 52 weeks and 2.9% over 13 weeks. 1 of 1 covered companies beat NIFTY on Mansfield relative strength, while 0 of 1 beat the sector itself.
Which Machine Tools - Others company has the strongest 4-Factor Sector Score?
Emkay Tools Ltd ranks first at 63.5/100 with 46.8% evidence confidence. The score prioritizes research; it is not a buy recommendation.
How much history does this Machine Tools - Others comparison include?
The page compares up to 4 reported quarters per company for fundamentals, returns and valuation, ending Mar 2026. Missing observations remain blank rather than being estimated.
How is the 4-Factor Sector Score calculated?
The four visible contributions add directly: growth and earnings up to 35 points, capital efficiency up to 25, valuation up to 20, and relative strength up to 20. Missing or stale evidence moves only the affected contribution toward neutral.
Is there a Nifty Machine Tools - Others index?
NSE India maintains Nifty indices for several broad sector categories — Nifty Bank, Nifty IT, Nifty Pharma and others — but not for every sub-sector grouping on this site. Whether or not an official Nifty index covers Machine Tools - Others, this page builds its own equal-weight basket of 1 listed Machine Tools - Others companies — one company, one vote, regardless of market value — so no single large company dominates the reading. Figures are as of Mar 2026.
Which are the best Machine Tools - Others stocks in India?
Ranked by this page's four-factor score, Emkay Tools Ltd places first among 1 listed Machine Tools - Others companies. That is a ranking of published data — earnings, quality, valuation and market behaviour as of Mar 2026 — and not a recommendation; Sector Alpha is not registered with SEBI as an investment adviser.
How many Machine Tools - Others stocks are listed in India?
This comparison covers 1 listed Machine Tools - Others companies in India, each above the size floor the site applies, with 20 quarters of reported figures per company where the filings exist. The full ranked list is on this page, as of Mar 2026.
Which Machine Tools - Others company has the best profit margins?
Emkay Tools Ltd has the highest operating margin at 57%, from 1 of 1 comparable companies. Emkay Tools Ltd shows the biggest recent improvement, at +3 percentage points. A high margin matters most when it is holding or rising, not when it is peaking.
Which Machine Tools - Others company earns the highest return on capital?
Emkay Tools Ltd leads on return on capital employed at 70.7%, across 1 of 1 companies. Read it beside the length of its reported history: a high return that repeats for years is evidence of a durable business, while a single high reading can be a small capital base or one good year.
Is the Machine Tools - Others sector beating the market?
Machine Tools - Others has underperformed NIFTY 500 by 2% over the last 52 weeks and 2.9% over 13 weeks, measured on an equal-weight index of its current members. Inside the sector, 1 of 1 covered companies are beating the market on their own. Sector strength does not transfer evenly to every stock in it.
Which Machine Tools - Others stock has the strongest price momentum?
Emkay Tools Ltd has the strongest relative strength against NIFTY 500. Relative strength answers last, after growth, quality and valuation: price can move well before the fundamentals confirm it, and sometimes without them confirming at all.
How many Machine Tools - Others companies does this comparison cover, and over what period?
It compares 1 listed companies over up to 4 reported quarters of fundamentals, ending Mar 2026, plus weekly price and relative-strength history. Membership is the full sector list — nothing is dropped for having thin data.
What is the total market cap of the Machine Tools - Others sector?
The 1 Machine Tools - Others companies on this page carry ₹1,098 crore of combined market value. Emkay Tools Ltd is the largest at ₹1,098 crore, about 100% of the sector's total on its own. Market value moves with price, so this reading is dated 2026-08-16.
How is the Machine Tools - Others sector performing?
1 of the 1 covered Machine Tools - Others companies are beating NIFTY 500 on Mansfield relative strength. The sector itself is 2% behind NIFTY 500 over 52 weeks on an equal-weight index of its current members. Readings are as of 2026-08-16.
Why are some values on this page blank?
A blank means that company did not report a comparable figure for that period, so nothing is shown. Missing observations are never interpolated, carried forward, or replaced with a similar-looking accounting line, and a company with missing evidence has its research score pulled toward neutral rather than being scored as bad.
Is this investment advice?
No. Every figure here is a deterministic calculation from reported company filings and market data, published for research. It contains no recommendation to buy or sell any security, does not account for your circumstances, and is not a substitute for advice from a licensed adviser.